Serving customers nationwide · Installation, repair & sales for every chamber brand Call now: 813-519-3232 Mon–Fri 8AM–6PM · Sat 9AM–12PM ET
Hyperbaric Service ProsHyperbaric
Service Pros Installation · repair · salesInstall · Repair · Training
Book an appointment

Every chamber brand · Nationwide · Since 2018

The trusted name in hyperbaric chamber installation, repair and sales.

Hyperbaric Service Pros installs, services, repairs and certifies soft-shell mild HBOT chambers and hard-shell chambers from 1.3 to 3.0 ATA — for clinics, wellness studios, athletic programs and home owners, anywhere in the United States. Certified hyperbaric technicians only — this is the one trade we do.

Book an appointment Call 813-519-3232

Soft-shell & hard-shell · Monoplace & multiplace · Oxygen concentrators, compressors, masks & hoods

Hard-shell hyperbaric chamber installed and commissioned in a finished treatment room alongside its oxygen concentrator.
A hard-shell chamber commissioned in a finished treatment room — leak tested at rated ATA, concentrator purity verified, operators trained before handover.
Documented installations
385
Jobs completed
628
Clients served
805
Chamber brands serviced
17

Counted from our own service records. The full set is in by the numbers below.

What we do

Six hyperbaric service lines, one accountable technician.

Chambers are pressure vessels, not appliances. Every job is scoped in writing before dispatch, performed against a chamber-specific checklist, leak- and function-tested, and closed out with documentation you can keep on file for insurance and manufacturer warranty.

Know your equipment

Soft-shell or hard-shell — we build, service and certify both.

The two families behave nothing alike. Pressure rating, seal design, gas delivery, service intervals and failure modes are all different, and so is the install. Here is the honest comparison we give every buyer who calls before purchasing.

Four-person soft-shell hyperbaric chamber inflated and ready for a session.
Mild HBOT · mHBOT

Soft-shell chambers

A flexible urethane or TPU bladder inside a webbing shell, closed by a zipper or a pinch-clamp door, pressurised by an air compressor and supplied with concentrated oxygen through a nasal cannula or non-rebreather mask.

Typical pressure
1.3–1.5 ATA
Closure
Zipper or pinch clamp
Oxygen source
10 LPM concentrator
Install time
Half a day typical
Watch items
Zipper, seams, filters
Hard-shell hyperbaric chamber rated to 1.5 ATA with acrylic view ports.
Hard shell · PVHO

Hard-shell chambers

A rigid steel or aluminium pressure vessel with acrylic view ports, a sealed door with a gasket and locking mechanism, and a controlled air supply. Monoplace units take one occupant; multiplace units seat several and can deliver oxygen by mask, hood or BIBS.

Typical pressure
1.5–3.0 ATA
Closure
Gasketed door
Oxygen source
Mask, hood or BIBS
Install time
Full day and up
Watch items
Acrylic, gaskets, valves
Read the full soft vs. hard shell guide

Why owners call us

Experienced hyperbaric installers matter.

Most chambers that fail early were never wrong out of the box — they were assembled by someone who had never built one. A twisted urethane bladder, an over-tensioned zipper, a concentrator drawing warm exhaust air, an intake filter never changed: each one shortens the life of the chamber and puts the occupant at risk.

We only work on hyperbaric equipment. Chamber built and squared, seals seated, gas train correct, ambient oxygen checked, occupant briefed.

  • Hyperbaric-specific certifications. IHA and IBUM certified, with CAPM project management and Six Sigma process credentials behind the checklists.
  • Every brand, soft and hard shell. Zippered and pinch-clamp soft chambers, steel and aluminium hard shells, monoplace and multiplace.
  • Leak and pressure-decay tested. Nothing is handed over until it holds pressure, the relief valve lifts where it should and the gauges agree.
  • Oxygen safety taken seriously. Concentrator siting and intake air quality, grounding, ambient O₂ monitoring, no petroleum products, correct signage and clear egress.
  • Real parts for your model. Bladders, zippers, gaskets, view ports, hoses, filters and valves sourced to the exact make and model — not generic substitutes.
Hard-shell hyperbaric chamber rated to 1.5 ATA with acrylic view ports, installed and pressure tested.
Pressure-relief valve function, gauge accuracy and door/port seals are verified on every visit.

Credentials

Certifications held

  • IHA CERTIFIEDInternational Hyperbaric Association — hyperbaric technician certification held by our principal technician.
  • IBUM CERTIFIEDInternational Board of Undersea Medicine — clinical hyperbaric technologist credential.
  • CAPM / PMICertified Associate in Project Management — schedule, scope and site coordination.
  • SIX SIGMA BLACK BELTProcess discipline applied to install checklists, leak testing and QA verification.

Certifications are held by our principal technician, Jeremy Hopkins. Read the background.

By the numbers

What the service record shows

Documented installations
385Install jobs closed out with photo evidence on file
Jobs completed
628Total jobs in our service records
Clients served
805Distinct clients in our service records
Chamber brands serviced
17Distributor and OEM chamber lines we have worked on
States with customers
48We dispatch to all fifty through our installer network
Cities served
107Distinct cities in our customer records
Technician home bases
38Locations our installer network works from
Google rating
5.0Average of the 10 Google reviews quoted on this site
Operating since
2018Installing and servicing chambers ever since

Figures as of August 2026, counted from Hyperbaric Service Pros’ own job, customer and installation-photo records and from our Google Business Profile. We publish what we can actually count, and we say what each figure counts. We do not publish pricing, revenue or a technician headcount.

Coverage

Nationwide, through a vetted installer network.

HSP is a United States based hyperbaric specialist working in all fifty states. Jobs beyond our own technicians’ reach are staffed through installers we have trained and vetted specifically for hyperbaric work, coordinated and documented centrally so the standard does not change with the ZIP code.

If you only need eyes on a problem, a two-hour remote diagnostic session over video is often enough to identify a leak path, a compressor fault or a concentrator purity issue without a truck roll.

How coverage works
Four-person soft-shell hyperbaric chamber set up and pressurised in a client space.
A four-person soft-shell chamber pressurised and leak-checked after a white-glove install.

Process

How a job runs

  1. Intake

    Send the chamber make, model and serial, the pressure rating, the site address and what you need done. Photos of the shell, the gas train and the room help us scope it accurately.

  2. Site review

    We check door widths and turns for the crated shell, floor loading, ceiling height for the door swing or zipper clearance, circuit capacity for the compressor and concentrator, room ventilation and intake air quality.

  3. Schedule & dispatch

    A certified hyperbaric installer is assigned, delivery and access are coordinated, and the arrival window is confirmed with your on-site contact.

  4. Build & connect

    Uncrate, assemble and square the shell, seat the door or zipper seals, mount and plumb the compressor and oxygen concentrator, fit inline filters, set the mask, hood or cannula delivery, dress the hoses.

  5. Test & commission

    Pressurise to rated ATA, pressure-decay leak test, relief-valve and gauge verification, concentrator purity by oxygen analyzer, ambient O₂ check in the room.

  6. Train & hand over

    Operator walkthrough on compression, equalization, O₂ delivery, emergency depressurisation and daily checks — then written close-out with maintenance intervals.

Client feedback

Rated 5.0 by the owners we work for

5.010 Google reviews

★★★★★

Jeremy recently installed my hard shell HBOT. Jeremy went above and beyond by driving over three hours to my residence on very short notice. He took great care positioning the chamber into the desired location, hooking everything up professionally and spending quite a bit of time explaining how the system worked and the required maintenance. I had not received a manual yet, but Jeremy didn’t need it. He clearly knows his business regarding all things HBOT. I highly recommend using Jeremy for chamber installations!!

Jerry WahlGoogle review · May 18, 2024
★★★★★

If you want a flawless service experience when you purchase a hyperbaric chamber for your home or commercial space, call Jermey at Hyperbaric Service Pros. He’ll ensure everything goes smoothly, and walk you step by step from purchase to installation. You want peace of mind when making this kind of investment which is exactly what you get here.

Wayne MillsGoogle review · October 12, 2024
★★★★★

Jeremy was prompt in getting with me and helped me solve my problem with my Hyperbaric chamber. I was very impressed with his knowledge of Hyperbaric Chambers. Afterwards I was able to have it up and going and again very content with his service. Recommend him without reservations.

Eugenio CastilloGoogle review · September 17, 2024
★★★★★

Jeremy is very professional and pays attention to every detail when it comes to the operation and maintenance procedures of our HBOT unit! Highly recommended if you need service and continued maintenance on your pod!

Mary NowakGoogle review · June 22, 2024

Reviews shown verbatim from our Google Business profile. Read them all on the about page.

Start a work order

Tell us the chamber, the site, and the timeline.

Make, model, serial number, photos, site address — send it all in one text or email and we can scope, price or diagnose it without a round of phone tag. Complete requests get worked first, simply because they can be.

Book an appointment 813-519-3232